Loading...

Olevimägi 2 / Sulevimägi 11

A residential building, situated in the old town of Tallinn and listed cultural monument, belongs to a businessman Hans H. Luik. The contractor ordered waterproofing works with us.

Share

Similar objects

Office building in Põhja Avenue 25

During waterproofing and surface treatment works in the building, a horizontal moisture barrier was carried out on the walls. MC-Bauchemie low viscosity MC-Injekt GL-93 acrylate gel was used for this purpose. A complex treatment work was carried out during the…

Three buildings in Lootsi St. 10

Located in Tallinn. Exterior walls of the buildings were cleaned from surface layers and plinth floor walls were covered with Epasit dp watertight mixture, on Epasit hb adhesive layer. INTERPLAST ISO-DRAIN 8 Diagonal was installed to protect the waterproofing on…

Commercial and residential buildings in Pagari St. 1 / Lai St. 44 / Pikk St. 59

Basement floor waterproofing was made using Epasit MineralDicht and MineralSanoPro surface treatment system for salts and moisture. Existing surfaces were cleaned and gaps in masonry were levelled using FEB Febond SBR polymer mixture and Epasit he. Epasit MineralDicht plast mineral…

Valga County Government

Valga County Government is situated in one of the oldest buildings that was built in the beginning of 20 century. Neo-classical building with Jugendstil elements was designed by a famous architect Wilhelm Ressler from Riga. The construction was ordered by…

Toompea Castle

Toompea settlement, or Väike settlement on Toompea in Tallinn, is a complex of buildings situated on the glint island of Baltic glint. In the settlement resides the Estonian Parliament. The settlement complex consists from buildings of different appearance and purpose.…


What we did

We fulfilled the sanation plastering, levelling of the foundation surface, installed waterproofing with protective heat insulation on the basement walls and the terrace.

What we used

The surfaces plastering was fulfilled with sanation plaster system EPASIT, for the adhesive coating we used epasit hb and salt-soluble aggregative sanation plaster epasit lpf. The foundation surfaces were levelled with polymeric Febond SBR admixture, waterproofed with thick bithumene coating epasit bdk/2kand protected against damages with a geotextile mat. The inner court was waterproofed with a bentonite mat. On the upper terrace we installed the waterproofing membrane Bituthene 4000 on the concrete levelling coating on the wall with upturnings.