Zincpot in Paldiskis

Zincpot trademark under AS Paldiski Tsingipada is an Estonian company from 2006. The company was created due to the lack of opportunities to quality and modern hot-dip galvanizing in the region. Zincpot services are directed to both inner and outer markets. The factory is offering metalworking companies steel corrosion protection service by hot-dip galvanizing which is the oldest and also the cheapest steel surface protection method. Zincpot is also offering a post-galvanizing passivation service which represents protecting the zinc layer itself from corrosion.

Hot-dip galvanizing factory started working in December in 2008. The total investment for the start-up was 164 million kroons. The factory is located in Paldiski technopark, which is near Paldiski and North Port, along Keila-Paldiski highway. The main constructor for the factory was Koger & Partnerid.


What we did

We fulfilled waterproofing and insulation works for hot-dip galvanizing factory’s indentations. Indentation baseplate with thickness around 400…500 mm were waterproofed using Grace Preprufe 300R rolled-on membrane. Grace Preprufe 160R rolled-on membrane was used to waterproof baseplate at the thickness of 300 mm. GRACE Bituthene 4000 rolled-on membrane was installed on the walls of the indentations. Bottom edges of the material were sealed using GRACE Bituthene LM liquid membrane and upper edges with GRACE Bituthene Mastic. The waterproofing was covered with Styrofoam 250 SL-A-N insulation with thickness of 50 mm.

What we used

GRACE Preprufe 300 R
GRACE Preprufe 160 R
GRACE Bituthene 4000
GRACE Bituthene LM
GRACE Bituthene Mastic