DENSOCURE W

Curing agent

Product features
Modified styrene-acrylates water soluble liquid, manufactured on the basis of dispersion.

• Significantly reduces loss (steaming out) of batch water.
• Contributes to hardening of surface parts of cement bond materials.
• Enhances resistance of on-surface layers to effects of aggresive media (oils, oit products, inorganic salts, etc.).
• Facilitates maintenance of treated floors layers.
• Applied by spraying or roller.
• Liquid composition, fit for direct application, no dilution required.

Application
DENSOCURE W is a single component water soluble liquid on the bases of modified styrene-acrylates copolymer, that is used to reduce steaming-out in freshly applied or cured concrete layers. Besides, DENSOCURE W is intended for treatment of floor structures, equipped with the abrasion resistant layer of shaken DENSOTOP. Application of curing agent reduces undesirable water loss and improves hardening of the floor surface, besides, reduces absorbance and closes the surface porous system. It enhances the floor surface resistance to chemicals and facilitates treatment of the surface.

Find more about product on the Estonian data sheet Betosan_Densocure_W.pdf and from our sales representatives.

 

DENSOCRETE PPE TH

Complex admixture (concentrate) for mortar and concrete

Product features
Single component powder, containing milled and fractioned carbonated filling, swelling admixtures, redispergative polymers, polypropylene fibers (PP-fiber), thixotropic admixtures and other active components.

• Greatly improves mortar and concrete.
• Significantly decreasse settling of mixture.
• Decreases mortar spreadability after application.
• Mortar obtains high bond to concrete and reinforcement.
• Effective decrease in creation of shrinkage cracks.
• Increased frost-resistance of applied mortar.
• Increased wateproofing of applied mortar.

Application
DENSOCRETE PPE TH is a complex premix for mortar and concrete, that may be used in ceilings and vertical surfaces. Improves waterproofing of repair mortar and reinforced concrete structures. Conventional dose rate up to 240 kg/m³.

Find more about product on the Estonian data sheet Betosan_Densocrete_PPE_TH.pdf and from our sales representatives.

Betosan s.r.o. was founded in Czech Republic in 1992. A company grew out of an engineering bureau, which dealt with the reinforced concrete diagnostics and repairs consultancy.
Betosan s.r.o. specialises in manufacture of rehabilitation and waterproofing materials for reinforced concrete; offers ready-to-use mixtures for reinforced concrete sanation as well as various mortar admixtures for reinforced concrete, that allow in-situ measuring in dosage of filling compounds, necessary for a blend.
A wide product line includes dry concrete mixes, containing XYPEX® admixture.

www.betosan.cz

ISO-DRAIN® 8 ACCESSORIES

Accessories for ISO-DRAIN 8 dimpled sheet installation

INTERPLAST edge profile

---

Special edge profile provides neat finishing and proper securing of dimpled sheet edges. Edge profile prevents penetration of soil into the air gap between the dimpled sheet and the foundation wall.

Material: HDPE  Colour: black Lengths: 2,0 m / 2,5 m Package: 20 pcs

INTERPLAST finishing strips

---

Finishing strips provide for close-fit and fast installation on different substrates.

3.5 mm I.D anchor heads with nails: Anchor heads material: HDPE Nail material: steel Package: 250 pcs

5 mm I.D. anchor heads with plugs: Anchor heads material: HDPE Plugs material: HDPE Package: 250 pcs Find more about product on the Estonian data sheet ISO_DRAIN8_ACCESSORIES.pdf and from our sales representatives.

 

ISO-DRAIN® 8 MESH

Is a dimpled sheet for waterproofing of damp walls and ventilation

INTERPLAST ISO-DRAIN 8 MESH is a special dimpled sheet mesh. Used for moisture level regulation in basements and other sub-structures.

Installed over the damp wall dimpled sheet creates a continuous air gap behind the plaster finish. The integrated on the dimpled sheet plastic mesh ensures the efficient plaster bonding.

Benefits:

• ensures continuous air circulation and permanent damp control in the wall
• ensures excellent bonding to plaster, etc.

ISO-DRAIN® 8 MESH special accessories

INTERPLAST Finishing strips Finishing strips render neat and prompt installation on various surfaces.Material: HDPE Colour: white Section length: 3,5 mm Package size: 250 pcs

INTERPLAST finishing strips Special strip provides for a neat boarder of the plaster integrated with dimpled sheet plastic mesh. The strip perforation improves the air circulation between the mat and underlying wall.Material: ABS Colour: light beige Length: 2,0 m Package: 20 pcs

 

Find more about product on the Estonian data sheet ISO_DRAIN8_MESH.pdf and from our sales representatives.

ISO-DRAIN® 8 GEO PLUS

Drainage and protective sheet for elastic waterproofing

 

Elastic waterproofing for foundation wall to be protected against stones, sharp-edged debris, etc A slip film, allows dimple sheet to move in response to backfill settlement, avoiding damage to waterproofing ISO-DRAIN 10 with 8 mm high dimples has been specially designed to provide great hydrostatic resistance and excellent drainage Geotextile mat filters out the soil particles, to prevent obstruction of air gap between dimples, ensuring the controlled drainage performance

Benefits:

• allows movement of dimple sheet to allow settlement
• protects waterproofing from physical damage
• rapid installation of all three layers in one operation
• durable
• ensures controlled drainage
• close dimples spacing (approx. 1860 pcs/m²)
• provides high compressive strength (250 kN/m²)
• 8 mm high dimples provide ample drainage capacity

Find more about product on the Estonian data sheet ISO_DRAIN8_GEO_PLUS.pdf and from our sales representatives.

ISO-DRAIN® 8 GEO

Protective drainage sheet for foundation walls

Benefits permanent air gap, suspended particles are filtered out by the geotextile mat outstanding compressive strength (250 kN/m²) superior physical strength and elongation properties durable, as normally will stay longer than the structure Find more about product on the Estonian data sheet ISO_DRAIN8_GEO.pdf and from our sales representatives.

 

 

ISO-DRAIN 8 FOAM

Insulating floor underlay

Benefits

INTERPLAST ISO-DRAIN 8 FOAM is a dimpled sheet underlay, which provides a reliable insulation under different floors. Its integrated foam plastic layer deafens footfall and improves thermal insulation. Dimple texturing creates full-surface air circulation and keeps rising moisture away from the floor finish.

The noise deafening benefit is a feature of particular interest:

• integrated 3 mm foam layer made from high-resiliency polyethylene foam (foam density: approx. 33 kg/m²) has an outstanding footfall effect
• the noise reduction is far higher than that achieved with conventional insulation materials: 26 (dB) measured as per DIN 52210 (a test protocol will be provided on the request)

Find more about product on the Estonian data sheet  ISO_DRAIN8_FOAM.pdf and from our sales representatives.

ISO-DRAIN® 8 DIAGONAL

Foundation wall protection and blinding bed

INTERPLAST ISO-DRAIN 8 DIAGONAL dimple sheet is designed for protection of foundations and blinding beds.

Application benefits:

• reduces water pressure to wall surface
• close dimple spacing provides high compressive strength and stability
• durable, rot-proof and suitable as blinding bed
• in blinding bedsit it eliminates the need for a lean concrete bed, thus reducing volume of surface work
• fast and easy to install, causes minimum delay in subsequent work

Should a thicker ISO-DRAIN 8 DIAGONAL be applied, the economy from reduce of the overlapped area will make up to 50% of accessories and up to 25% of the necessary material.

 

Find more about product on the Estonian data sheet ISO_DRAIN8_DIAGONAL.pdf and from our sales representatives.

ISO-Drain® 3 GEO MESH

Uncoupling underlay for tile floors

Tile floor finish Elastic mix for tile finishing Plastic mesh for adhesion of the dimpled sheet and applied underlay mix Dimpled sheet ISO-DRAIN 3 Polypropylene geotextile Underlay tile finishing mix for adhesion of geotextile and the substrate Floor

Benefits
INTERPLAST ISO-DRAIN 3 GEO MESH is designed as uncoupling underlay for tiling floor finishing. Plastic mesh ISO-DRAIN 3 GEO MESH, applied onto the dimpled sheet, ensures adhesion of underlay mix. The new dimple geometry provides increased compressive strength and improved adhesive penetration for fast and easy installation.

Application benefits:

• bridges substrate cracking, prevents crack propagation to the tiles above
• distributes and reduces local compressive stress
• protects the floor finish from moisture migration
• adhesive penetration in mesh creates solid interlocking bond between tiles and underlay
• dimples crown design permits fast filling by adhesive mix with no voids

ISO-DRAIN 3 SEALING STRIP (120 mm wide) is recommended for sealing joints in-situ.

Find more about product on the Estonian data sheet ISO_DRAIN3_GEO_MESH.pdf and from our sales representatives.